Search Posts:

11/05 NC Power Connectors

View Entire Thread

Return to Threads

  by Bill Degnan - 08/31/2018 11:24
PDP 11/05 NC Backplane pins
View of the pin side of the backplanes installed in the 11/05 NC. The bottom backplane is for the CPU/RAM. The top backplane is a DD11-B, used for peripheral devices that have Non Processor (DMA) Grant continuity such as the M7800 serial card. Click image for larger view.

PDP 11/05 NC Power Connector Ports
View of the backplane 9-pin power connector ports. Click image for larger view.

I was hoping that I might be able to run an RK05 drive from this box, but the power connectors are not compatible (although it may be possible to use an adapter).

I don't have direct photos of the PDP 11/05 S power connectors, but I believe this model chassis is RK05-compatible. Here is a photo that shows the back side of the power connector board of the PDP 11/05 S, note there appear to the 6 and 15-pin connector ports.



Buy a Commodore Computer Poster

Popular Topics and FAQs

Past Issues:

vcfmw ECCC 2018 Kradle Sinclair100 ad on kbd

This image was selected at random from the archive. Click image for more photos and files from this set.