Next | Previuos | Contents |
THE MAIN MENU
The main menu of the M10 appears on the screen when the computer is first switched on.
The current day, date and time is displayed on the top line of the menu.
SETTING THE TIME
to reset the day, date and time on the menu, proceed as follows:
1. Access BASIC and after the Ok prompt, enter the following command:
DAY$="day"<ENTER>
where day is one of the following three-letter abbreviations:
Mon - Monday
Tue - Tuesday
Wed - Wednesday
Thu - Thursday
Fri - Friday
Sat - Saturday
Sun - SundayWhen this is accepted by the M10 the Ok prompt appears again.
2. Now enter the command:
DATE$-- "mm/'dd/yy"<ENTER> if you have the M10 MODEM.
or
DATE$="dd/mm/yy"<ENTER> it you have another model.
where
dd is a number from 01 to 31 representing the day
mm is a number from 01 to 12 representing the month
- 9 -
Next | Previuos | Contents |