SHARE |
|
|
by Bill Degnan - 05/30/2008 21:55 |
|
Cabling 4956 to a 4962 Mod 4 drive unit
There are 5 ribbon cables. Four for the hard drive and 1 for the disk drive. I believe I have the correct cabling, based on the manuals. I was not able to find any references to unparking the hard drive, so I will assume that this is not necessary. I powered on the system with the 4978 display station. Not much happened other than everything powering on and some lights. I seek advice. Reply |
|